# Quick Start

## Solve a simple cantilever in seconds!

- If there are any loads on your beam, you can either drag them off the beam or clear the beam completely.
- Drag loads onto the beam.

Congratulations!You have now generated shear and bending moment diagrams by simply placing loads on the beam!

- Drag a fixed support onto the beam.

Congratulations!You have now generated slope and deflection diagrams by simply placing loads on the beam!

- Specify the beam length.
- Specify the beam moment of inertia.
- Specify the beam elastic modulus.
- You are done! Obtain your results!